Menu
Your Cart

We have updated our Privacy Policy. We recommend you to read it as it explains how we collect and use your data. For more information, click here.

By continuing to browse this site, you are agreeing to the use of cookies for statistical and advertising purposes, as well as to facilitate information sharing on social networks. To find out more and change your cookie settings. Privacy Policy

VACUUM MATERIALS

The purpose of vacuuming the composite material is to make the laminate stronger by pulling out the air bubbles that most often remain inside the laminate if it's not done This section provides single vacuum materials for vacuuming and infusion / RTM processes.

Model: Insiets
The infusion net is a material to help transport the resin in infusion processes throughout the laminate. It creates smooth air flow to achieve a homogenous vacuum enviroment and a high quality composite part.Price shown for 1m2 infusion bleederNorādītā cena par 1m2 infūzijas sietaWidth : 1200&..
2.36€
Ex Tax:1.95€
Model: Infusion-Plug
The infusion connector plug is for the infusion process. The infusion connector is placed under the vacuum film where an infusion transfer tube with a vacuum sealing tape is attached at the top. The infusion connector can be used repeatedly.This connector can also be used for wet application and sim..
6.05€
Ex Tax:5.00€
Model: INFSP
Infusion spiral is a spiral tube which allows easy flow or resin from the resin feed tube into product. Infusion spiral is typically positioned underneath the feed line directing resin flow into the further corners of the part...
6.05€
Ex Tax:5.00€
Model: INFT500
Infusion spray adhesive is designed to hold fabrics (glass, agamid, carbon or peel ply), pads and similar types of dry materials to themselves or onto mold surfaces during resin infusion, vacuum moulding or RTM. Most importantly, INFUTAC will not interfere with the curing process of v..
18.15€ 25.47€
Ex Tax:15.00€
Model: MTI-H
MTI infusion hose.The MTI hose consists of an evacuation hose, non-woven and air permeable membran. The sandwich construction leads top optimize the evacuation process and quality. Thus the MTI hose will minimize costs using vacuum infusion proces.Advantage:No resin trap necessary V..
4.78€
Ex Tax:3.95€
Model: MTI-V
MTI valveThe valve is placed between the resin flow hoses. It regulates the flow of the resin, giving optimum fibre volume ration. The fibres are evenly covered with resin. No resin pooling at the inlet point. No supersaturation with resin. The price shown is for 1 unit...
36.06€
Ex Tax:29.80€
Model: peelply
Peel Ply fabrics may be used to build large composite structures or to facilitate small repairs where a clean, textured surface is desired for additional bonding and finishing operations. A Peel Ply layer also provides pressure to the GRP composite structure during fabrication and cure allowing gas ..
2.54€
Ex Tax:2.10€
Model: PRF1
Perforated film has a good chemical and thermal resistance for a low cost. Mostly used in wet-layup vacuum bagging process in combination with breather and vacuum bag...
1.21€
Ex Tax:1.00€
Model: Spiral-Plug
The infusion spiral connector is used for the infusion process. The infusion spiral connector is placed under the vacuum film where a vacuum transfer tube with vacuum sealing tape is attached at the top. Place the infusion tube at the bottom of the infusion connector through which air or material is..
6.66€
Ex Tax:5.50€
Model: TC-SQZE
Tube clip SqueezeeSqueezee allows exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusionIdeal for disconnecting all tube line Requires only minimum of force for disconnecting resin lines Exact dosing of the resin flow is possible Designed for ..
43.32€
Ex Tax:35.80€
Model: VACT
High-performance vacuum film is specially made for maximum air hold during the curing time.Width 1,2mThickness 50MicronsResist up to 120 C° *Price shown for 1m2 (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){ (i[r].q=i[r].q||[]).push(arguments)},i..
1.15€
Ex Tax:0.95€
Model: VAC-B-120
Fast and easy usable vacuum tube for long parts and small parts. Saves vacuum sealant tape and it can be used with polyester, vinylester and epoxy resins.Width 120cmThickness 75µTemperature up to 180CChemical resistance*Price shown for 1 linear meter..
3.51€
Ex Tax:2.90€
Showing 1 to 12 of 15 (2 Pages)

VACUUM MATERIALS

VACUUM MATERIALS

Tags:

,