Infusion epoxy resin 1.5kg
Infusion resin 7 is featuring encreased bounding strength and reactivity, outstanding
flexibility while a very high strength and temeprature resistance. The resin contains modificatory agent that
extremely improves penetration of the laminating mixture into the fabric
Hardener 7M is a low-viscosity cyclo-alifatic hardener containing post-curing additives that enables
lamination also without consequent curing by heat. Gel-time (100g) at 23°C is 40 minutes.
We recommend to use the system at the temperature range between 18°C – 30°C and use the common
processing procedures for the composite production.
This system has been designed so that it will get cured efficiently also at room temperature of 18°C – 30°C,
therefore it can be processed at room temperature and used without the consequent heat curing. The
processing time depends on the used hardener.
By curing at room temperature (approx. 25°C) for the period of 24 hours a heat resistance of 55°C – 65°C can
By heat curing a heat resistance of up to 110°C can be achieved
A 100g resin : B 50g hardener
* Price shown for 1.2kg resin system
|Epoxy resin||Epidian 6411|
|Viscosity 25°C mPa.s||1 000 - 1 400 mPas|
|Gel time, temp. 20°C||30 min|
|Epoxy number, mol/100 g||5,65 - 5,95 mol/kg|
- Stock: In Stock
- Model: INF-1.5
- Weight: 1.20kg
- Dimensions: 20.00cm x 20.00cm x 30.00cm
- SKU: INF