Küllastamata polüestervaigud

Polimal 144 series

Neutral construction resins, terephthalic, with good processing and strength parameters. Opaque colour, from grey to dark grey.

APPLICATION

Manufacture of resin and mineral moulds, in particular garden figures (garden gnomes).

PRODUCT ADVANTAGES

  • Good miscibility and suspensibility of mineral fillers in resin
  • High strength parameters (similar to isophthalic resins)
  • High heat resistance HDT
  • Good processing properties
  • Increased chemical resistance

AVAILABLE VERSIONS

  • Polimal ® 144-01 P — accelerated
  • Polimal ® 144 A — ecological
  • Polimal ® 144 B — for resin cartridges
  • Polimal ® 144 AWTP — ecological, accelerated, thixotropic, with hardening colour indicator

Polimal 109 AWTP

Medium flexible construction resin, orthophthalic, accelerated. Low styrene emissions and hardening colour indicator system.

APPLICATION

Manual or spray manufacturing based on thermoplastics (PMMA and PMMA/ABS).

PRODUCT ADVANTAGES

  • Very good processing properties
  • High oversaturability of fibreglass
  • Favourable hardening characteristics
  • Good strength parameters

Polimal 1090 AWTP

Medium flexible construction resin, orthophthalic, accelerated. Very low styrene emissions and hardening colour indicator system, as well as increased adhesion to acrylic and ABS.

APPLICATION

Manual or spray manufacturing based on thermoplastics (PMMA and PMMA/ABS).

PRODUCT ADVANTAGES

  • Very good processing properties
  • High oversaturability of fibreglass
  • Allows to introduce a large quantity of filler
  • Favourable hardening characteristics
  • Good strength parameters

Polimal 103

Medium flexible, low viscosity resins with good processing properties

APPLICATION

Manual manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • Good strength parameters
  • Relatively low contraction
  • Flexibility
  • Elasticity
  • Relatively high impact strength

Polimal 103 A

Medium flexible, low viscosity resins with good processing properties.

APPLICATION

Manual manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • Good strength parameters
  • Relatively low contraction
  • Flexibility
  • Elasticity
  • Relatively high impact strength

Polimal 104 AWTP

Medium flexible resin with increased heat resistance.

APPLICATION

Manual or spray manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • High wettability of fibreglass
  • Favourable hardening characteristics
  • Hardening colour indicator
  • Heat resistance HDT
  • Bending and peeling strength

Polimal 104 N-1

Unsaturated polyester resin, orthophthalic, low viscosity, medium reactive.

APPLICATION

Manufacture of fibreglass-strengthened products and resin and mineral composites.

PRODUCT ADVANTAGES

  • Non-adhesive surface after hardening
  • Allows to introduce a large quantity of filler
  • Easier mixing and casting
  • Very good strength parameters of hardened resin (heat resistance, hardness) 

Polimal 108

Rigid resin, medium reactive. Alternative for a colourless top coat.

APPLICATION

Recommended as a finishing layer of polyester and glass laminate, as well as an ingredient of flooring screeds (along with Polimal 150).

PRODUCT ADVANTAGES

  • As the last laminate layer, it ensures a non-adhesive, "dry" surface.

Polimal 109 and other in series

Medium reactive construction resin with high hardness after hardening — dust-dry surface.

APPLICATION

Manual manufacturing of polyester and glass laminates, particularly with large dimensions and rigid.

PRODUCT ADVANTAGES

  • Provides dry surface with high hardness
  • Relatively low polymerisation contraction
  • High product rigidity and hardness
  • Allows using resins to manufacture polyester and glass forms

AVAILABLE VERSIONS

  • Polimal 109 A – low styrene emissions
  • Polimal 109-32 K – lower viscosity

Polimal 143 AWTP-1

APPLICATION

Manual and spray production of laminates used to manufacture sports and tourism equipment, tubs, paddling pools, tanks, etc.

PRODUCT ADVANTAGES

  • Very high oversaturability of fibreglass
  • Low run-off on vertical walls
  • Relatively short gelling time
  • Favourable hardening characteristics

Polimal 1059 AWTP

Medium flexible construction resin with increased heat resistance, modified DCPD, accelerated, with promoters. Low styrene emissions, hardening colour indicator system.

APPLICATION

Manual and spray production of polyester and glass laminates used to manufacture sports and tourism floating equipment, etc.

PRODUCT ADVANTAGES

  • High wettability of fibreglass
  • Favourable hardening characteristics
  • Low contraction
  • Low styrene emissions
  • Colour alteration system
  • High heat resistance

Polimal 1094 AWTP-1

Basic medium flexible construction resin, orthophthalic, accelerated, with low styrene emissions and hardening colour indicator system. Lloyd's Register Certificate no. MATS/2782/3.

APPLICATION

Manual and spray production of laminates used to manufacture sports and tourism floating equipment, tubs, paddling pools, tanks etc.    

PRODUCT ADVANTAGES

  • Very good processing properties
  • High oversaturability of fibreglass
  • Favourable hardening characteristics
  • Good strength parameters

Polimal 104 AWTP

Medium flexible resin with increased heat resistance, orthophthalic, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions.

APPLICATION

Manual or spray manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • High wettability of fibreglass
  • Favourable hardening characteristics
  • Heat resistance HDT
  • Bending and peeling strength

Polimal 120 T

Isophthalic, thixotropic resin with reduced run-off on vertical surfaces.

APPLICATION

Manufacture of products with high strength parameters and high heat and water resistance. May be used to produce polyester and glass laminates.

PRODUCT ADVANTAGES

  • High oversaturability of fibreglass
  • Increased chemical and heat resistance
  • Relatively short gelling time
  • Favourable hardening characteristics

Polimal 144 and other in series

Rigid resin with increased heat resistance, medium reactive, neutral, terephthalic.

APPLICATION

Manufacture of polyester and glass laminates and resin and mineral moulds.

PRODUCT ADVANTAGES

  • High strength parameters
  • Good processing properties
  • Increased chemical resistance
  • High strength parameters — similar to isophthalic resins
  • Colour alteration system
  • High heat resistance

AVAILABLE VERSIONS

  • Polimal ® 144 A –ecological, LSE
  • Polimal® 144-01 –  for garden gnome production
  • Polimal ® 144 B – for blasting cartridges
  • Polimal ® 144 AWTP – ecological, LSE, accelerated, thixotropic, with hardening colour indicator

Polimal 1056 T

Modified resin based on DCPD, rigid, reduced run-off on vertical walls.

APPLICATION

Manual and spray manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • Very good processing properties
  • High wettability of fibreglass
  • Thick layers of laminate may be made in one go
  • Favourable hardening characteristics
  • Low contraction
  • Low styrene emissions
  • High heat resistance HDT
  • High hardness

Polimal 1056 AWTP

Rigid modified resin based on DCPD, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions. Winter version.

APPLICATION

Manual and spray manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • High wettability of fibreglass
  • Thick layers of laminate may be made in one go
  • Favourable hardening characteristics
  • Low contraction
  • Low styrene emissions
  • High heat resistance HDT

Polimal 1057 AWTP

Medium flexible DCPD modified resin with promoters, accelerated, thixotropic. Features a hardening colour indicator and reduced styrene emissions.

APPLICATION

Manual and spray manufacturing of polyester and glass laminates.

PRODUCT ADVANTAGES

  • High wettability of fibreglass
  • Thick layers of laminate may be made in one go thanks to moderate exotherm
  • Favourable hardening characteristics
  • Low contraction
  • Low styrene emissions
  • Colour alteration system
  • High heat resistance HDT

Polimal 1075

Orthophthalic resin with increased heat resistance.

APPLICATION

Manufacture of resin and mineral moulds.

PRODUCT ADVANTAGES

  • Easier mixing and casting of the mixture
  • Very good strength parameters

Polimal VE 2MM and version T

Vinyl-ester resin features the best chemical resistance properties of all resins produced by the CIECH Group.

APPLICATION

Manufacture of products that require high chemical resistance — laminates, forms, polymer concrete and others. Products made of this resin maintain high strength parameters after prolonged exposure to an aggressive environment.

PRODUCT ADVANTAGES

  • Good processing properties
  • High oversaturability of fibreglass
  • After hardening, dry surface is obtained

AVAILABLE VERSIONS

  • Polimal VE 2MM T – thixotropic resin

Polimal 1602 APyS

Orthophthalic construction resin, accelerated, with reduced styrene emissions and low run-off on vertical surfaces. Contains fillers and dyes that provide the product with white colour and flammability reducing properties.

APPLICATION

Manufacture of polyester and glass laminates with reduced flammability — e.g. low voltage power boxes.

PRODUCT ADVANTAGES

  • Efficiency
  • Short gelling time
  • Short hardening time
  • Low peak temperature
  • High heat resistance HDT ᵒC

Polimal 1608 PS

Accelerated construction resin based on DCPD, with reduced flammability and smoke emission. Contains carefully selected fillers that provide the product with flammability reducing properties, while retaining relatively good processing parameters.

APPLICATION

Manufacture of polyester and glass laminates with reduced flammability and smoking — e.g. rolling stock (domestic traffic).

PRODUCT ADVANTAGES

  • Moderate viscosity
  • Short gelling and hardening time
  • Low peak temperature
  • Good miscibility
  • High heat resistance HDT

Polimal VE 11M

Neutral vinyl-ester resin with reduced flammability. Lloyd's Register Certificate MATS/4379/1.

APPLICATION

Production of laminates with increased requirements regarding both chemical resistance and flammability reduction.

PRODUCT ADVANTAGES

  • High oversaturability of fibreglass
  • High strength parameters
  • Good chemical resistance
  • High heat resistance HDT

Polimal 150

Flexible orthophthalic resin, low reactive, high tensile elongation.

APPLICATION

Flexibility additive for rigid, construction resins. Allows increasing flexibility of polyester and glass laminates and obtaining higher impact resistance and higher break elongation.

PRODUCT ADVANTAGES

  • High flexibility
  • Low polymerisation contraction

Polimal 109-32 PyK

Accelerated orthophthalic resin. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.

APPLICATION

Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.

PRODUCT ADVANTAGES

  • Allows to introduce a large quantity of filler
  • Easier mixing and casting
  • Very good strength parameters

POLIMAL 109-32 K

Orthophthalic base resin, neutral. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.

APPLICATION

Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.

PRODUCT ADVANTAGES

  • Allows to introduce a large quantity of filler
  • Easier mixing and casting
  • Very good hardened resin strength parameters

POLIMAL 109-38 RPyK

Double accelerated orthophthalic resin. The product meets all necessary hygienic requirements — National Institute of Hygiene's approval HK/B/0502/02/2010.

APPLICATION

Manufacture of marble-like products and polyester and glass laminates used in households, construction and other branches of the industry.

PRODUCT ADVANTAGES

  • Allows to introduce a large quantity of filler
  • Easier mixing and casting
  • Very good hardened resin strength parameters

Polimal 101-37 B

Medium flexible orthophthalic resin with good durability that contains an amine accelerator.

APPLICATION

Manufacture of mastics and trowels.

PRODUCT ADVANTAGES

  • High durability
  • Amine accelerator

Polimal 109-59 B

Medium flexible orthophthalic resin with good durability and stability. Contains an amine accelerator.

APPLICATION

Manufacture of resin and mineral compositions hardened with benzene peroxide.

PRODUCT ADVANTAGES

  • High durability
  • Good stability
  • Amine accelerator

Polimal 103 G and version GL

Medium flexible resins featuring a relatively mild hardening process. Their basic feature is high transparency and colour clarity. They are used in centrifugal casting.

APPLICATION

  • Polimal 103 G — manufacture of buttons cut from a plate obtained in rotating drums.
  • Polimal 103 GL — manufactured using metal tubes to cast rods, from which buttons are cut.

AVAILABLE VERSIONS

  • Polimal 103G — low viscosity resin
  • Polimal 103GL — high viscosity resin

PRODUCT ADVANTAGES

  • Transparency
  • Colour clarity
  • Mild hardening process

Polimal 1808 LT

Medium flexible transparent resin, orthophthalic, thixotropic. Features a relatively mild hardening process.

APPLICATION

Manufacture of clothing accessories, coloured moulds and laminates.

PRODUCT ADVANTAGES

  • Transparency
  • Mild hardening process

Polimal 1809 U

Transparent resin in the form of uniform, viscous liquid with a characteristic odour.

APPLICATION

Manufacture of polyester and glass laminates.

PRODUCT ADVANTAGES

  • High durability
  • Transparency

Polimal 144 B

Terephthalic resin with good durability, containing an amine accelerator.

APPLICATION

Manufacture of resin cartridges (blasting cartridges).

PRODUCT ADVANTAGES

  • Good miscibility and suspensibility of mineral fillers in resin
  • High durability in comparison with DMA
  • Good processing properties
  • No need to add amine

Polimal 142

High viscosity terephthalic resin with increased heat resistance.

APPLICATION

Manufacture of polyester moulding compounds.

PRODUCT ADVANTAGES

  • High heat resistance HDT 95°C

Polimal 127

Transparent NPG isophthalic-neopentyl resin with high resistance to ageing factors (weather conditions).

APPLICATION

Production of "solid surface" products (among others).

PRODUCT ADVANTAGES

  • Very good mechanical and performance parameters
  • It is pre-accelerated
  • High efficiency
  • Good processing properties
  • Optimal curing properties
  • Reinforced resistance to UV radiation

Polimal 1058

Medium-flexible DCPD construction resin. Neutral and low-viscosity

APPLICATION

Production (by resin transfer moulding, RTM) of glass-polyester laminates.

PRODUCT ADVANTAGES

  • Very good processing properties
  • Good impregnability of fibre glass
  • Lower styrene emission in relation to standard orthophthalic resins
  • Short post-curing time
  • Good wettability of filling materials
  • Very good strength parameters
  • High thermal resistance (HDT)

Polimal 1058-1

Medium-flexible DCPD construction resin with extended gelation time. Neutral and low-viscosity.

APPLICATION

Production (by resin transfer moulding, RTM) of glass-polyester laminates.

PRODUCT ADVANTAGES

  • Very good processing properties
  • Good impregnability of fibre glass
  • Lower styrene emission in relation to standard orthophthalic resins
  • Short post-curing time
  • Good wettability of filling materials
  • Very good strength parameters
  • High thermal resistance (HDT)

Küllastamata polüestervaigud

Küllastamata polüestervaigud

küllastamata polüestervaigud [vc_row full_width="" gap="0" full_height="" columns_placement="middle" equal_height="" content_placement="" video_bg="" video_bg_url="" video_bg_